2011 Reliance Power Placement Paper: 1) Which of the following is mass flow meter? a.turbine 2.micromotion flowmeter 3.magnetic 2) Cobalt 60 has a half life period of? 3) TC timelag_________if thermowell is added 4) For a pr tx with sensitivity,and range given for water, what it is for a liquid with another density. 5) Which of the following cant b detected using gas chromatograph. c2h6,ch4,none,co2 6) Which of the following is not used as a carrier gas n2,helium ,o2,co2 7) The best control for temperature. a.Pi b.P c.PId d.PD 8) J type thermocouple is of: iron constantan, copper constantan, etc 9) Magnetic flowmeter works on which principle: 10) For magnetic meters, E=? a. bv/d b. bvl/d c. none 11) Leakage vi is not possible for 12) The need of emergency shut down? 13) Pirani gauges are used for 14) The bourdon tubes should not face a. creep b. hysterisis c. fatigue d. all 15) If 0-500mm of hg is calibrated as 4-20 ma, then wat is o/p for 125mm 16) SMPS does not have 17) In a ph electrode, the signal conditioning is provided by bjt,fet,etc 18) Cavitation is caused by 19) IEEE 802.5 obeys ethernet protocol,ip,fddi,token ring,none 20) Veena contracta point is characterised by: 21) The amplifier gain is a,then the f/b gain,for a positive f/b system in an oscillator is: 22) The stable system should have which kind of feedback? 23) THE DAMPER UNIT is used for: 24) The beta ratio is=; 25) The input to a binary adder is 110,what is sum ,carry? 26) The 4 2bit binaryu counter has the modulus:
No comments:
Post a Comment